$7.95 RedLine Limited Slip Friction Modifier



[RedLine_80301]
   
RedLine Limited Slip Friction Modifier

Limited-slip or Positraction units use plates or clutches to provide the proper amount of lock-up to the differential. Slippery lubricants are required to prevent chatter, but too much slipperiness causes excess wheel spin, reducing traction. For perfect traction, use Red Line 75W90NS and add the Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive until the chatter disappears.

Satisfies performance requirements of GM 1052358, Ford M2C118-A, 19B546-MA, Chrysler 4318060 and most imports.

Recommended Dosage:
Use 4% for prevention of limited slip chatter in broken-in units (typical one 4 oz. bottle) or 4 to 8% for the break-in of new differentials.

Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive will significantly reduce the friction during break-in of differentials. High temperatures encountered in break-in can destroy the hardening of the gear teeth causing rapid wear of the softened gears. This additive can reduce the break-in temperatures by as much as 50°F, improving break-in conditions. Compatible with petroleum or synthetic gear oils. Red Line Gear Oils already contain this additive (except the NS).

In non limited-slip racing differentials and quick change units using the Red Line ShockProof Gear Oils an additional 3 to 6% Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive is recommended.

  • Compatible with both petroleum and synthetic gear oils
  • Reduces break-in temps as much as 50°F
  • Add 1oz at a time to clutch-type limited slip or posi-traction units to eliminate chatter



1055 - Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'speedfor_newstore.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by

select p.products_id, p.products_image from orders_products opa, orders_products opb, orders o, products p INNER JOIN products_to_stores p2s ON p.products_id = p2s.products_id where p2s.stores_id = '1' AND opa.products_id = '2799' and opa.orders_id = opb.orders_id and opb.products_id != '2799' and opb.products_id = p.products_id and opb.orders_id = o.orders_id and p.products_status = '1' group by p.products_id order by o.date_purchased desc limit 6

[TEP STOP]