$26.30 Motul Gear FF Competition 75W140 (LSD) - 100% Synthetic Ester



[Motul_105779]
   
Motul Gear FF Competition 75W140 (LSD) - 100% Synthetic Ester
ADDITIONAL OPTIONS ARE SHOWN AT THE BOTTOM OF THE PAGE!

Special offer: Buy 6 bottles, and get free shipping!

This is for one liter of Motul synthetic fluid for the front and rear limited slip differentials (LSDs) in your GT-R. You need 1.55 liter in the rear differential, and .65 in the front differential, for a total of 2.2 liters. So, you will need to buy 3 of these to service both differentials at the 18,000 mile service and beyond.

TYPE OF USE
Specially designed for racing vehicle gearboxes : speed way, rallye,
All hypoid differentials with limited slip system, gearbox with integrated limited slip differential, mechanical transmission, synchronized or not synchronized gearboxes, transfer gearboxes operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

PERFORMANCES
STANDARDS Above Existing Standards
SPECIFICATIONS API GL5 "MUGEN Le Mans 24H" HEWLAND and X-TRAC Japanese GT
100% synthetic extreme pressure lubricant for an efficient anti wear protection, a better resistance at high temperature and a longer life time.
Included friction modifier avoid noisy or dragging limited slip differential.
0% shear loss : Unshearable oil film in extreme conditions.
Stays in 140 grade after KRL 20 hours shear test as requested by SAE J306 Standard, July 1998 update
Very high lubricating power which decreases friction and wear.
140 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise.
Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
Less effort required on the gear lever to shift the gears.
Suitable for any type of seal and yellow material used in gearboxes design.
Anti-corrosion, Anti-foam.

RECOMMENDATIONS
Oil change: According to manufacturers' requirements and adjust according to your own use.

PROPERTIES

Colour Visual Blue
Viscosity grade SAE J306 75W-140
Density at 15°C (59°F) ASTM D1298 0.906
Viscosity at 40°C (104°F) ASTM D445 170 mm²/s
Viscosity at 100°C (212°F) ASTM D445 24.7 mm²/s
Viscosity index VIE ASTM D2270 178
Flash point ASTM D92 212°C / 413°F
Pour point ASTM D97 -36°C / -33°F

Available Options:

Option:





Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Manufacturers
0 items
Share Product