Have you changed your differential in your GT-R? Or just looking for more control over the factory settings? The Linney AWD controller will allow for up to 4 different maps to be programmed and saved for use on your vehicle. This new controller will change the way you drive your GT-R!
The original torque split screen in the GTR that shows AWD is not really AWD. They tested with an upgraded Quaife diff and confirmed that the original AWD ECU is unable to compensate for the correct level of torque between the front and rear, which makes the car read incorrectly . Essentially, any change in the middle diff, needs a setting change in the controller. You can program fully adjusted maps, with changes to the steering angle, slip on front and rear compensation, brake pressure, g-sensor compensation, opposite lock on wheels, and the launch program!
Instruction are as simple as:
Click down (snow) – click up – click down – click up - and it will start flashing torque split on the Custom view display (the total 4 up and down clicks you must do within a maximum of 2 seconds)
Next you can change map and roll up and down
25% = map 0
50% = map 1
75% = map 2
100% = map 3
Once chosen, wait about 2 seconds and the chosen map will be saved!