HKS has developed upgrade kit for R35 GT-R for
some more power! People who are not satisfied
with 800+ and want more power on R35, this is
the kit you need. We have made it for a longer
stroke to gain on the lower RPM for the big
turbine. So you can have absolute power even on
the normal RPM. This high-end, made in Japan
products of piston, conrod and crankshaft are
made by billet method.
POINT 4. Normal bore compatible 95.5mm
- POINT 1. Piston Kit
- HKS were insistent on forging, we employed billet method from forged bar material.
- We have employed special truss shape with our test and strength analysis for an extreme power.
- The perfect shape of very short height low friction type gives light weight and strength. They are 80g lighter compared to the stock and STEP1/STEP2 piston.
- POINT 2. Connecting rod
- Being a longer stroke, we have developed original conrod. For modification work of engine side is needed only at the block oil return.
- POINT 3. Crankshaft stroke 95.5mm
- Billet method form forged bar material.
- HKS special shape that came from our profound racing experience analysis on V6 balance.
- For better friction we have employed special edge for counter weight.
- We have designed counter weight for the perfect shape for a perfect balance!
Also we could cut the cost by not having liner work and block shaving of upper surface.
POINT 5. Only HKS can provide the high quality total setup package kit.
- Not to decrease the strength of the block which relate directly to the engine's performance, HKS has employed stock bore size that does not need liner process.
- This kit is for upgrade from 800+. Surge tank, injector kit, intercooler and etc.are offered separately for a total tuning solution.
- HKS have tested our products over and over in the bench or circuit for the best performance and safety.