*ONE YEAR WARRANTY AGAINST MANUFACTURER DEFECTS!*
*Adjustable wastegate actuators included!*
*Optional BILLET compressor wheel upgrade available by selecting the option below!*
SpeedForSale has worked closely with BNR over the last several years perfecting the STU GT28 hybrid sequential turbocharger package we exclusively distribute for the MKIV Supra Turbo. The quality and pricing of BNR items have proven to be very popular among the Supra crowd. A couple years ago, we approached BNR about performing a similar 'hybrid' upgrade on the GT-R stock turbo manifolds/castings. So, we purchased a new set of GT-R turbos and shipped them to BNR for R&D. Our goal with this project was to have a turbocharger housing which would fit all of the OEM factory oil and coolant feed and return lines so that they look STOCK when installed on the car. Unfortunately, at the time there were no good options for doing this, and contacting IHI proved to be a time consuming process which yielded no results. So, we dropped the project. But, in late 2011, BNR found a solution which would produce the results which we were originally trying to produce, and here they are!

From BNR: We are proud to release our first turbocharger upgrades for the 2008+ Nissan GTR! Our entry level Cast wheel upgrades are capable of up to 700 AWHP, while the Billet upgrades are capable of up to 800 AWHP. They are both 100% bolt up with no fabrication required! All oil and water lines bolt on with ease which makes this a pain free install. The compressor housings and turbine housings are CNC machined for the upgraded center housing rotating assemblies. We used extensive engineering techniques to CNC machine the exhaust manifold/turbine housings without cutting or welding.

All our competitors have to cut the manifolds off of the turbine housings so they can machine the turbine housings to accept the upgraded center housing rotating assemblies. Cutting and welding the turbine housings is way to big of a risk to take because of cracking issues which plague cast iron welding. The weight of the turbocharger, intake ducting, down pipes and intercooler pipes combined with heat cycles, all put load on the one weld holding the turbo to the manifold.

BNR Supercars Stage 1 R35 twin turbo upgrades consists of TD05H turbine wheels, high performance 360 degree thrust assemblies, optional Billet compressor wheels (please select Cast or Billet below), and BNR's customized bearing housing for easy installation! All rotating assemblies are balanced to .5 gram/in2 and the wastegate actuators are adjustable from 11-17 psi! Please note that the pictures and sizing chart shown below are of the Billet Compressor wheel upgrade.

**PLEASE NOTE THAT YOU MUST EITHER SHIP US YOUR CORE TURBOCHARGERS, OR PURCHASE A NEW SET OF CORE TURBOS FOR $3750.**